hpmont HD5L-PLUS Series - User Manual

137 pages

To Next Page

To Next Page

Loading...

HD5L-PLUS Series

Elevator Controller

User Manual

V1.0 2022.06

Table of Contents

Questions and Answers

H
hsandovalAug 27, 2025
How to troubleshoot E01 error on hpmont Controller?
- D
  Donna MannAug 27, 2025
  To troubleshoot an E01 error on your hpmont Controller, consider these steps: * Ensure the connection between the controller and motor is properly established by connecting HD5L-PLUS and the motor correctly. * Verify that the motor parameters are correctly set. * If the rating of the used HD5L-PLUS is too small, select a controller with a higher rating. * Also, check that the Acc./Dec. time is appropriately set; adjust if it's too short.
B
Bob HornAug 27, 2025
Why does hpmont HD5L-PLUS show error E09?
- L
  lisa16Aug 27, 2025
  The E09 error on the hpmont Controller typically indicates an overheating issue. This might be because the ambient temperature is too high, so use a controller with higher power capacity. Poor external ventilation of HD5L-PLUS could also be the cause, so improve the ventilation around HD5L-PLUS. Check if the fan is working correctly and replace the cooling fan if it’s faulty. If the fault occurs to temperature detection circuit, seek technical support.
K
kingwilliamAug 25, 2025
What causes error E04 on hpmont HD5L-PLUS Controller and how to fix it?
- M
  Mr. Michael ChavezAug 26, 2025
  Error E04 on your hpmont Controller can be triggered by several factors. It may be due to input voltage being too high, so check the power input. Additionally, a too-short Dec. time can cause this, so set a proper value for Dec. time. Improper wiring leading to overvoltage of hardware can also be a cause, so check wiring and wire HD5L-PLUS properly.
G
Gabriel RobertsAug 25, 2025
What to do if hpmont Controller shows error E08?
- S
  Stephanie CarpenterAug 25, 2025
  If your hpmont Controller displays error code E08, it indicates a potential issue with the output. Check for a short circuit between phases output or the ground, and ensure the wires are properly connected. Also, verify if the output current is too high and inspect the connection and mechanism. If the power module is damaged, contact the supplier for repairing.

hpmont HD5L-PLUS Series Specifications

General

Brand	hpmont
Model	HD5L-PLUS Series
Category	Controller
Language	English

Related product manuals

hpmont HD5L-4T3P7

hpmont HD5L-4T7P5

hpmont HD5L-4T011

Preview: hpmont HD5L series

hpmont HD5L series

hpmont : HD5L-4T5P5

hpmont HD3L-4T3P7

hpmont HD3L-4T5P5

hpmont HD3L-4T7P5

Preview: hpmont HD3L Series

hpmont HD3L Series