Procedure
1. Before setting the tracking system parameters, you need to set Tracker
Controller in Feature Parameters on the Running Param. tab page. Select
the corresponding vendor based on the information about the tracker
controller. If the vendor is not in the list, select Other vendors.
This section uses Other vendors as an example.
Figure 6-46 Setting tracking system controller
2. On the Tracking System tab page, select Cong Para.
Figure 6-47 Setting
conguration parameters (tracking system)
SmartLogger3000
User Manual 6 WebUI Operations
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 138
To Next Page
Loading...
Need help?
General
