Huawei SmartLogger3000 User Manual

Parameter Description
Phase angle oset protection The standards of certain countries and regions require that the
device needs to be protected when the phase angle oset of
the power grid three phases exceeds a certain value.
10-minute UV protection Species the 10-minute undervoltage protection threshold.
10-minute UV protection time Species the 10-minute undervoltage protection duration.
10 minute OV protection (V) Species the 10-minute overvoltage protection threshold.
10 minute OV protection time
(ms)
Species the 10-minute overvoltage protection duration.
Level-N OV protection (V) Species the level-N grid overvoltage protection threshold.
Level-N OV protection time
(ms)
Species the level-N grid overvoltage protection duration.
Level-N UV protection (V) Species the level-N grid undervoltage protection threshold.
Level-N UV protection time
(ms)
Species the level-N grid undervoltage protection duration.
Frequency change rate
protection
If this parameter is set to Enable, the device is protected when
the power grid frequency changes too fast.
Frequency change rate
threshold (Hz/s)
Species the frequency change rate protection threshold.
Duration threshold (s) for
frequency change rate
protection
The device is protected when the grid frequency change
duration exceeds the value.
Level-N OF protection (Hz) Species the level-N grid overfrequency protection threshold.
Level-N OF protection time
(ms)
Species the level-N grid overfrequency protection duration.
Level-N UF protection (Hz) Species the level-N grid underfrequency protection threshold.
Level-N UF protection time
(ms)
Species the level-N grid underfrequency protection duration.
NO TE
N can be 1, 2, 3, 4, 5, or 6.
SmartLogger3000
User Manual 6 WebUI Operations
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 147

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English