Huawei SmartLogger3000 User Manual

Feature Parameters
Parameter Description Remarks
Communication
interruption
duration
Species the duration for determining
communication interruption between the device and
the SmartLogger.
-
Shutdown on
communication
failure
The standards of certain countries and regions
require that the device shut down after the
communication is interrupted for a certain time.
If this parameter is set
to Enable, the device
automatically shuts
down after the
Communication
interruption duration is
reached.
Automatic
startup upon
communication
recovery
If this parameter is set to Enable, the device
automatically starts after communication recovers.
If this parameter is set to Disable, the device needs
to be started manually after communication
recovers.
This parameter is
displayed when the
Shutdown on
communication failure
is set to Enable.
Protection in
the case of
communication
failure
In reverse current prevention scenarios, if this
parameter is set to Enable, the device performs
active power percentage derating when the
communication between the device and the
SmartLogger or Smart Dongle is interrupted for a
period longer than Communication disconnection
detection time. The device performs protection
according to the set power.
-
Communication
disconnection
detection time
(s)
Species the fail-safe detection time for the
disconnection between the device and the
SmartLogger or Smart Dongle.
This parameter is
displayed when the
Protection in the case
of communication
failure is set to Enable.
Active power
mode when
communication
fails
Species the protection threshold of the active
power after the communication is interrupted. The
value can be a percentage or a xed value.
This parameter is
displayed when the
Protection in the case
of communication
failure is set to Enable.
Active power
limit when
communication
fails
(%)
Species the active power threshold in percentage. This parameter is
displayed when the
Protection in the case
of communication
failure is set to Enable
and Active power
threshold when
communication fails is
set to a percentage.
SmartLogger3000
User Manual 6 WebUI Operations
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 148

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English