Huawei SmartLogger3000 User Manual

Alarm
ID
Alarm Name Alarm
Severity
Alarm
Sub-ID
Cause Suggestions
1129 SmartLogger
Certicate
Invalid
Warning 1 The
SmartLogger
digital
signature
certicate is
invalid.
Check the time or change the
digital signature certicate.
1130 SmartLogger
Certicate
About to
Expire
Warning 1 The
SmartLogger
digital
signature
certicate is
about to
expire.
Change the digital signature
certicate in time.
1131 SmartLogger
Certicate
Expired
Major 1 The
SmartLogger
digital
signature
certicate has
expired.
Change the digital signature
certicate immediately.
1132
Storage not
Match Alarm
Major 1 There exists a
Smart Battery
ESC that is
not
completely
connected to
the DC bus.
1. Referring to the cable
connection check topology
view, locate the Smart Battery
ESC that has the cabling
problem.
2. Turn
o the battery input
switch, the DC and AC
switches in the LV panel. Wait
for 5 minutes. Verify that no
electricity is present using a
multimeter before checking
the DC bus cable connection
of the battery.
1134 PCS not
Match Alarm
Major 1 There exists a
Smart Battery
PCS that is
not
completely
connected to
the DC bus.
1. Referring to the cable
connection check topology
view, locate the Smart Battery
PCS that has the cabling
problem.
2. Turn
o the battery input
switch, the DC and AC
switches in the LV panel. Wait
for 5 minutes. Verify that no
electricity is present using a
multimeter before checking
the DC bus cable connection
of the battery.
SmartLogger3000
User Manual 7 Device Maintenance
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 239

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English