Hypertherm Powermax30 AIR Service Manual

212 Powermax30 AIR Service Manual 808850
8 – Parts
Accessory parts
Part number Description
127102 Basic plasma (circle) cutting guide
027668 Deluxe plasma (circle) cutting guide
127144 Dust cover
024548 Leather torch lead cover, brown, 7.6 m (25 feet)
024877 Leather torch lead cover, black with Hypertherm logo, 7.6 m (25 feet)
127217 Shoulder strap
127169 Leather cutting gloves
127416 Protective glasses, shade 5 lens
128836 Thermal grease, 1/8 ounce
027055 Silicone lubricant, 1/4 ounce

Hypertherm Powermax30 AIR Specifications

General

Built-in Air Compressor	Yes
Output Voltage	83 VDC
Input Voltage	120-240 V
Current Output	15–30 A
Cutting Thickness	Up to 10 mm (3/8 in) recommended cut
Gas Supply	Built-in air compressor
Operating Temperature	-10°C to +40°C (+14°F to +104°F)