Powermax30 AIR Service Manual 808850 215
8 – Parts
Recommended spare parts
Hypertherm recommends that service centers keep the following spare parts on hand for repairs because these parts are
critical or are usually exposed to heavy and repeated wear. You may find that you need to revise or expand this list for your
customers, based on the conditions and work environments in your region.
Kit Number Description Reference
428226 Kit: Current adjustment knob page 202
228561 Kit: Ground clamp page 202
428388 Kit: Work lead, 4.6 m (15 feet) (includes ground clamp) page 202
428402 Kit: Power board, CSA page 204
428403 Kit: Power board, CE page 204
428401 Kit: Compressor-driver board page 204
428404 Kit: Control board page 205
428235 Kit: Power switch page 205
428377 Kit: Internal air compressor page 207
428376 Kit: Heat exchange coil page 207
428375 Kit: Air filter assembly (includes gas hose, drain tube, and elbow fittings) page 207
428378 Kit: Air filter element page 207
428374 Kit: Solenoid valve (includes gas hoses and elbow fittings) page 207
428179 Kit: Replacement O-rings for torch body page 210
428381 Kit: Air T30 torch handle (includes handle screws) page 210
428181 Kit: Air T30 torch handle screws page 210
428156 Kit: Torch trigger and spring page 210
428182 Kit: Spring for torch trigger page 210
428162 Kit: Torch start switch page 210
228109 Kit: Torch cap-sensor switch page 210
428393 Kit: Air T30 hand torch assembly with 4.6 m (15 foot) lead page 210
428176 Kit: Air T30 torch lead, 4.6 m (15 feet) page 210
128836 Thermal grease, 1/8 ounce page 212
027055 Silicone lubricant, 1/4 ounce page 212
To Next Page
Loading...
