Safety Guide
Intro-7
No. Operation Precautions
8 Maintenance
and
Inspection
● When releasing the brake on a vertically oriented actuator, be careful that it
does not fall under its own weight, catching the operator's hand or damaging
workpieces.
● The slider or rod may be misaligned from the stop position if the servo is
turned OFF. Avoid injury or damage due to unnecessary operation.
● Be careful not to lose the cover or any removed screws, and be sure to return
the product to the original condition after maintenance and inspection work.
Otherwise, this may lead to product damage or injury due to incomplete
mounting.
* Safety/protection fence: If there is no safety/protection fence, the movable
range should be indicated.
9 Modification
and
Disassembly
● Do not modify, disassemble/assemble, or use maintenance parts not specified
on your own discretion.
10 Disposal ● When the product exceeds its useful life or is no longer needed, dispose of it
properly as industrial waste.
● When removing the actuator for disposal, avoid dropping components when
detaching screws.
● Do not put the product in a fire when disposing of it. The product may rupture
or generate toxic gases.
11 Other ● If you are equipped with a medical device such as a pacemaker, do not
approach the product or its wiring, as the device may be affected.
● See the Overseas Specifications Compliance Manual to check compliance
with overseas standards if necessary.
● For the handling of actuators and controllers, follow the dedicated instruction
manual of each unit to ensure safety.
To Next Page
Loading...
Need help?
General
