6.4 Parameter function descriptions
6-12
6. Parameters
Parameter No.7: Wireless function setting
No.
Category
Name
Symbol Unit Input range
Default setting
at shipping
7 A
Wireless
function setting
RWOF －
Disabled,
Enabled
Enabled
● Either Enabled or Disabled can be selected for the ELECYLINDER wireless function.
● When [Enabled] is selected, wireless communication between the ELECYLINDER and
the data setting device is possible.
● When [Disabled] is selected, wireless communication between the ELECYLINDER and
the data setting device is not possible. There is no transmission or reception of wireless
communication radio waves.
Caution
This parameter is not displayed on ELECYLINDERs without wireless circuit boards (no
WL, WL2 in the Option model number).
To Next Page
Loading...
Need help?
General
