International Standard Compliance
Intro-11
International Standard Compliance
The ELECYLINDER complies with the following overseas standards.
Refer to the Overseas Standard Compliance Manual (ME0287) for more detailed information.
If it is necessary to announce EC Declaration of Conformity with this product built in your facility, as this
product itself declares the conformity to EU Directives in some specific conditions as stated below, you
would be able to utilize this declaration.
EU Directives Applicable for EC Declaration of Conformity
EMC Directive (2014/30/EU) • • • • • To be checked in CE marking described in product nameplate.
RoHS Directive (2011/65/EU) • • • • Same as above.
RE Directive (2014/53/EU) • • • • • • To be checked in EC Declaration of Conformity.
EC Declaration of Conformity proving conformity to RE Directive may be modified without notice according
to addition of conformed models, specification change and so on. Visit our homepage (http:/www.iai-robot/)
or contact our sales site if necessary.
CE Marking
UL
RoHS Directive EMC Directive RE Directive
○ ○ ○ -
To Next Page
Loading...
Need help?
General
