8.1 Precautions for maintenance and inspection work
8-1
8. Maintenance and Inspection
8.1 Precautions for maintenance and inspection work
Make sure to read the following precautions before conducting any maintenance or inspection
work.
Warning
Do not climb on or put anything on the ELECYLINDER.
Otherwise, this may lead to accidental falling, injury or damage to the product due to
falling objects, product loss of function or performance degradation, or shortening of
product life.
Before releasing the brake, make sure to check there is nothing that will interfere with
moving parts within the operation range.
The slider or rod may fall, possibly injuring the operator or people nearby
and damaging the ELECYLINDER, workpiece or equipment.
Caution
Check that the power to the ELECYLINDER is OFF before conducting any
maintenance or inspections.
Be careful not to lose the cover or any removed screws.
Be sure to return the product to the original condition after maintenance and inspection
work.
Mounting in an incomplete state may cause injuries or damage to the product.
Do not modify, disassemble/assemble, or use maintenance parts not specified on your
own discretion under any circumstances.
To Next Page
Loading...
Need help?
General
