6.2 How to change parameters
6-3
6. Parameters
Basic operation
If setting parameters numerically,
touch the set value button.
The set value will blink and
Ten Key window will open.
Enter the value with the Ten Key pad
and touch the [ENT] key.
The parameter will be changed.
However, if you touch [ESC], the parameter will
not be changed and the edit window will return.
If setting parameters with radio buttons,
touch the radio buttons.
The parameter will be changed.
When all parameter changes are complete,
touch the Home button. .
If parameters have been changed,
the "Restart the controller?"
screen will be displayed.
1
Action
2
Action
Action
3
Action
4
To Next Page
Loading...
Need help?
General
