IAI X-SEL - Page 446

416
INTELLIGENT ACTUATOR
Appendix
I/O Parameters
No. Parameter name
Default value
(Reference)
Input
range
Unit Remarks
299 Port number assigned to
output function selection
300
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 46, “Output function selection 300.”
* If 0 is set, the function will be assigned to output port No. 300.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
300 Port number assigned to
output function selection
301
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 47, “Output function selection 301.”
* If 0 is set, the function will be assigned to output port No. 301.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
301 Port number assigned to
output function selection
302
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 48, “Output function selection 302.”
* If 0 is set, the function will be assigned to output port No. 302.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
302 Port number assigned to
output function selection
303
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 49, “Output function selection 303.”
* If 0 is set, the function will be assigned to output port No. 303.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
303 Port number assigned to
output function selection
304
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 50, “Output function selection 304.”
* If 0 is set, the function will be assigned to output port No. 304.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
304 Port number assigned to
output function selection
305
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 51, “Output function selection 305.”
* If 0 is set, the function will be assigned to output port No. 305.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
305 Port number assigned to
output function selection
306
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 52, “Output function selection 306.”
* If 0 is set, the function will be assigned to output port No. 306.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
306 Port number assigned to
output function selection
307
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 53, “Output function selection 307.”
* If 0 is set, the function will be assigned to output port No. 307.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
307 Port number assigned to
output function selection
308
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 54, “Output function selection 308.”
* If 0 is set, the function will be assigned to output port No. 308.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
308 Port number assigned to
output function selection
309
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 55, “Output function selection 309.”
* If 0 is set, the function will be assigned to output port No. 309.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
309 Port number assigned to
output function selection
310
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 56, “Output function selection 310.”
* If 0 is set, the function will be assigned to output port No. 310.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
310 Port number assigned to
output function selection
311
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 57, “Output function selection 311.”
* If 0 is set, the function will be assigned to output port No. 311.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)
311 Port number assigned to
output function selection
312
0 0 to 6999 Specify the port number to be assigned to the function of I/O
parameter No. 58, “Output function selection 312.”
* If 0 is set, the function will be assigned to output port No. 312.
(Main application version 0.64 or later/F-ROM 32-Mbit version
only)