524 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
3. For each preset, you can customize various advanced options as shown in Figure 10-25.
Figure 10-25 Create FlashCopy Mapping Preset customization
If you prefer not to customize these advanced settings, go directly to step 4.
You can customize the advanced setting options that are shown in Figure 10-25:
– Background Copy Rate
– Incremental
– Delete mapping after completion. (This option automatically deletes a FlashCopy
mapping after the background copy is completed. Do not use this option when the
background copy rate is set to zero.)
– Cleaning Rate
4. You can choose whether to add this FlashCopy mapping to a Consistency Group:
– If you want to include this FlashCopy mapping in a Consistency Group, select Yes, add
the mappings to a consistency group in the next window (Figure 10-26 on
page 525). Select the Consistency Group from the drop-down list.
– If you do not want to include this FlashCopy mapping in a Consistency Group, select
No, do not add the mappings to a consistency group.
5. Click Next.
Incremental FlashCopy mapping: Even if the type of the FlashCopy mapping is
incremental, the first copy process copies all of the data from the source volume to
the target volume.
To Next Page
Loading...
Need help?
General