698 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
7. Right-click the canister that contains the node that you want to update and select
Remove, as shown in Figure 12-50.
Figure 12-50 Removing a node canister
8. A warning message appears to ask whether you want to remove the node, as shown in
Figure 12-51. Click Yes.
Figure 12-51 Node removal confirmation window
The non-configuration node is removed from the management GUI Update System panel
and is shown as Unconfigured when you hover over the node after you select
Monitoring → System.
Important: Ensure that you select the non-configuration nodes first.
To Next Page
Loading...
