Customer IP addresses
Table 52. Customer IP addresses
Node A (the
server located in
the lower part of
the rack)
Port Host Name IP Address Network Mask Default Gateway
eth0
Node B (the
server located in
the upper part of
the rack)
Port IP Address Network Mask Default Gateway
eth0
Customer and Replication IP addresses
Table 53. Customer and Replication IP addresses for VTL or OpenStorage systems
Default gateways for eth2 and eth5 for VTL systems or eth7 or eth11 for OpenStorage systems should be different,
otherwise the vlans are meaningless.
For VTL systems, provide a routing path from the IP address on eth2-site1 to the IP address of eth2-site2, and a
routing path from the IP address on eth5-site1 to the IP address of eth5-site2. For OpenStorage systems, provide a
routing path from the IP address on eth7-site1 to the IP address of eth7-site2, and a routing path from the IP
address on eth11-site1 to the IP address of eth11-site2.
Source Site
Node A (the
server located in
the lower part of
the rack)
Port IP Address Network Mask Default Gateway Dedicated VLAN
eth2 for VTL
systems or eth7
for OpenStorage
systems
eth5 for VTL
systems or eth11
for OpenStorage
systems
Node B (the
server located in
the upper part of
the rack)
Port IP Address Network Mask Default Gateway Dedicated VLAN
eth2 for VTL
systems or eth7
for OpenStorage
systems
eth5 for VTL
systems or eth11
for OpenStorage
systems
Destination or Target Site
Node A (the
server located in
the lower part of
the rack)
Port IP Address Network Mask Default Gateway Dedicated VLAN
eth2 for VTL
systems or eth7
for OpenStorage
systems
eth5 for VTL
systems or eth11
for OpenStorage
systems
Appendix B. IP address worksheet 147
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
||||
|
|
|
|
||||
|
|
|
|
|||||
|
|
|
|
||||
|
|
|
|
||||
|
|
|
|
|
|
|||||
|
|
|
|
||||
|
|
|
|
||||