IBM TS7650 User Manual

Table 54. Host names and DNS settings for setting up the TSSC with the TS7650G (continued)
Item or setting Instructions eth0 eth1 (if applicable)
Name server
(DNS) internet
address 2
(Optional)
Provide the dotted decimal
address of the second name
server that this workstation
can access (for example,
5.127.42.252). Although this
is optional, you can specify
a second name server
when you configure a
backup or secondary
server.
Name server
domain name 2
If you have a second name
server, provide the domain
name of the second name
server (for example,
medina2.xyz.it).
Routing settings: Complete the following section if you want to specify a default gateway for routing.
Gateway address Confirm and record the
dotted decimal or symbolic
name address of the
gateway (for example,
8.127.155.254 or
londongate).
TSSC IP addresses
Table 55. TSSC IP addresses
TSSC Ethernet Port Default IP Address
Customer Assigned IP
Address
TSSC External N/A
TSSC Internal 172.31.1.1 (fixed, do not
change)
N/A
TSSC IP addresses from frame-to-frame
A single frame is ten IP addresses, and each node within a frame requires its own
set of ten IP addresses – from 0 to 9. If there are no attached devices/systems, the
first usable frame would be 10. For example:
v 172.31.1.10 - 172.31.1.19 would be considered frame 10
v 172.31.1.20 - 172.31.1.29 would be considered frame 20
v 172.31.1.30 - 172.31.1.39 would be considered frame 30...
v 172.31.1.240 - 172.31.1.249 would be considered frame 240
Appendix B. IP address worksheet 149

IBM TS7650 Specifications

General

Brand	IBM
Model	TS7650
Category	Storage
Language	English