7
N Selecting a call channel
Call channel is a pre-programmed memory channel that can
be accessed by simply pushing call channel button.
±
Push [M/CALL] several times to select the call channel
mode, then rotate [DIAL] to select the desired call channel.
• “C0” or “C1” appears instead of memory channel number.
±
Push and hold [MR/CALL] for 1 sec. to select
the call channel mode then push [Y]/[Z] to se-
lect the desired call channel.
• Push [MR/CALL] to select the memory mode, or
push [VFO/LOCK] to select the VFO mode.
“C0” or “C1” appears
[DIAL]
[M/CALL]
89
7
MEMORY/CALL CHANNELS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
To Next Page
Loading...
