Icom ID-E880

124
10
MENU SCREEN OPERATION
D Memory bank link function
Sets the memory bank link function ON or OFF (default). The
link function provides continuous bank scan, scanning all
contents in the selected banks during bank scan.
• Bank link setting
q Rotate [DIAL] to select the bank that you want to
change.
w Push [ ](MONI) to enter bank setting.
e Rotate [DIAL] to select the setting.
r Push [ ](MONI) to set and return to the BANK selection
screen.
t Rotate [DIAL]
to select next bank and repeat steps w to
r, or push [MENU
] to exit MENU screen operation.
D Program scan link function
Sets the program scan link function. The link function pro-
vides continuous program scan in the selected program
scan number during program scan.
Default setting for P-LINK
P0 to P-LINK P9: PROG 0 to
PROG 24 are linked.
• Confirming program scan link
q Rotate [DIAL] to select the program scan link number that
you want to confirm.
w Push [ ](MONI) to enter program scan link setting.
e Rotate [DIAL] to select “LINK.”
r Push [ ](MONI), then rotate [DIAL] to confirm the linked
program scan.
t Push [
](MONI) to exit.