Icom ID-E880 - Alarm Area 1 Configuration

66
5
DV MODE OPERATION
D RX message indication
The received message can also be checked in MESSAG
(message) screen.
q Select “RX MSG” in MESSAG (message) screen.
MENU ¶ MESSAG ¶ RX MSG
(Push [MENU ]), (rotate [DIAL], then push [ ](MONI).)
• The received message is displayed.
• Push [](LOW) or [](CS) to scroll the message.
w Rotate [DIAL] to display the station call sign (caller).
e Push [ ](MONI) several times to return to RX MSG
screen.
• Push [](LOW) or [](CS) to scroll the call sign.
r Push [MENU ] to return to frequency indication.
N Automatic reply function
The automatic reply function replies to calls by a station that
specified your call sign.
D Automatic reply function setting
q Enter “REPLY” in DV SET mode.
MENU ¶ DV SET ¶ REPLY
(p. 134)
(Push [MENU ]), (rotate [DIAL], then push [ ](MONI).)
• REPLY (auto reply) screen is displayed.
w Rotate [DIAL] to turn the automatic reply function ON or
OFF.
OFF : Deactivate the automatic reply function.
(default)
ON : Reply to the call with your own call sign.
e Push [
](MONI).
• Returns to DV SET mode automatically.
r Push [MENU ] to return to frequency indication.
The Automatic replay function is turned OFF automatically,
when a manual transmission (pushing [PTT]) is performed.