Icom ID-E880

154
13
OTHER FUNCTIONS
N All reset
AT POWER ON
The function display may occasionally display erroneous in-
formation
(e.g. when first applying power). This may be caused
externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
• Partial reset is also available. See right for details.
IMPORTANT!:
Resetting the CPU CLEARS all programmed contents to
the their default settings.
q
Push and hold [ ] for 1 sec. to turn power OFF.
w
Push and hold simultaneously [MENU ] and [S.MW],
then turn power ON to reset the CPU.
[MENU ]
[S.MW]
N Partial reset
AT POWER ON
If you want to initialize the operating conditions
(VFO frequency,
VFO settings, menu group’s contents)
without clearing the mem-
ory contents, call sign memories or repeater lists, a partial
reset function is available.
q
Push and hold [ ] for 1 sec. to turn power OFF.
w
Push and hold simultaneously [S.MW] and [VFO/MHz],
then turn power ON to reset the CPU.
[S.MW] [VFO/MHz]