78
6
GPS/GPS-A OPERATION
D Saving own/received position data
q Enter “GPS.POS” in GPS mode.
MENU ¶ GPS ¶ GPS.POS
(Push [MENU ]), (rotate [DIAL], then push [ ](MONI).)
• GPS POS screen is displayed.
w Rotate [DIAL] to select the position data indication.
• MY POS : Displaying own latitude and longitude.
• RX POS : Displaying (caller) other station latitude and longi-
tude.
e Push [ ](MONI) to enter the selection.
r Push and hold [MW](S.MW) for 1 sec. to save the selected
position data to GPS memory (G00).
• The M-CH number advances automatically in case the next M-
CH already contains information.
• 50 GPS M-CH are available.
• Push [M/CALL] to display stored position data.
D Displaying direction and forward
Displaying own direction, received station’s direction and set
position and direction in the GPS memory.
q Enter “D/F” in GPS mode.
MENU ¶ GPS ¶ D/F
(Push [MENU ]), (rotate [DIAL], then push [ ](MONI).)
• D/F (Direction/Forward) screen is displayed.
w Rotate [DIAL] to select “RX,” “MY” and “GPS.M”
[Indication items]
• MY : Displays own direction, elevation and the time.
• RX : Displays other station’s direction and distance from
own position.
• GPS.M : Displays the direction and distance from own posi-
tion of alarm setting for the memorized position in the
GPS memory.
e Push [ ](MONI) to enter the selection.
• 16 compass points are available.
r Push [ ](MONI) several times to select other information.
t Push [MENU
] to return to frequency indication.
To Next Page
Loading...
