Icom ID-E880

123
10
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
N SCAN mode items
D Priority watch
Activates priority watch or priority watch with alert (Bell).
• OFF : The priority watch is turned OFF.
(default)
• ON : The transceiver checks the memory channel
frequency every 5 sec.
• BELL : The transceiver checks the memory channel
frequency every 5 sec. You can be alerted
with beeps and blinking “S.”
D Scan pause timer
Selects the scan pause time. When receiving signals, the
scan pauses according to the scan pause time.
• 2–20SEC : Scan pauses for 2–20 sec. on a received sig-
nal in 2 sec. steps.
(default: 10 sec.)
• HOLD : Scan pauses on a received signal until it dis-
appears.
D Scan resume timer
Selects the scan resume time from a pause after the received
signal disappears.
• 0SEC : Scan resumes when a received signal disap-
pears.
• 1–5SEC : Scan pauses 1–5 sec. after a received signal
disappears.
(default: 2 sec.)
• HOLD : Scan remains paused on the received signal
according to the scan pause timer even if it
disappears. Rotate [DIAL] to resume manu-
ally.
Scan resume timer must be set shorter than scan pause
timer
(previous item), otherwise this timer does not function.
D Program skip scan
Sets programmed skip scan function ON (default) and OFF
for VFO scan (full scan, programmed scan, etc.) operation.