Icom ID-E880

137
10
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Break-in function
The break-in function allows you to break into a conversation
where the two original stations are communicating with call
sign squelch enabled. See pages 68, 69 for details.
• OFF : The break-in function is set to OFF.
(default)
• ON : The break-in function is set to ON.
- “BK” appears on the display.
NOTE: The break-in function is turned OFF automatically
when turning transceiver’s power OFF
D EMR function
The EMR communication mode is available for digital mode
operation. In the EMR communication mode, no call sign set-
ting is necessary. When an EMR communication mode sig-
nal is received, the audio (voice) will be heard at the speci-
fied level even if the volume setting level is set to minimum
level, or digital call sign/digital code squelch is in use. See
page 67 for details.
• OFF : The EMR function is set to OFF.
(default)
• ON : The EMR function is set to ON.
- “EMR” appears on the display.
NOTE: The EMR communication function is turned OFF
automatically when turning transceiver’s power OFF