IDS X64

Section: 9
IDS X64 Installer Manual 700-398-02D Issued August 2010
33
Table 11: Number of Digits Data
Code
Old four-digit code
New six-digit code
Installer Code
9999
999999
Maintenance Code
8888
888888
Master User Code 1
1234
123456
User Codes 2-128
XXXX
XXXX00
[INSTALLER CODE] [*] [2] [3] [*] [NUMBER OF DIGITS] [*]
The valid data range is either 4 or 6.
LOCATION 24
Number of Account Code Digits (default = 4)
This location sets the account code length to either 4 or 6 digits. If the length of your account
codes is 4 digits and then they are changed to 6 digits, the last two digits will be set to 0.
[INSTALLER CODE] [*] [2] [4] [*] [NUMBER OF DIGITS] [*]
The valid data range is: 4 or 6.
9.3 Daylight Savings
LOCATION 25
Month to Start Daylight Saving (default = 1)
Select the month for Daylight Saving to commence, as per Table 12.
Table 12: Month Data
Value
Month
Value
Month
0
Disabled
7
July
1
January
8
August
2
February
9
September
3
March
10
October
4
April
11
November
5
May
12
December
6
June
[INSTALLER CODE] [*] [2] [5] [*] [MONTH] [*]
The valid data range: 1 – 12, with 0 to disable.
NOTE:
If this location is disabled, then by default, locations 26 and 27 will also be disabled. This means that
even if you put values into locations 26 and 27, daylight savings will not commence.