IDS X64

Section: 9
IDS X64 Installer Manual 700-398-02D Issued August 2010
41
Table 21: Phone Number Example
Data entered
Explanation
[INSTALLER CODE][*]
To enter program mode
[5][1][*]
To enter location 51 (phone number 1)
[0]
To dial the zero
[MODE][5]
This programmes the 4 second pause
[0][3][1]
This enters the area code
[7][0][5][1][3][7][3]
The remainder of the number
[*]
To program the number
[#]
To exit installer menu
Refer to Figure 2 to see how telephone numbers work.
Figure 2: How Telephone Numbers Work
LOCATION 50
Call-back Telephone Number
The phone number programmed into this location will be used to respond to a call-back
request from the IDS download software/PC. (This is an advanced location).
Option 4 in location 48 (Download Options) must be enabled for the call-back telephone number to have
an effect.
[INSTALLER CODE] [*] [5] [0] [*] [CALL-BACK NUMBER] [*]
LOCATION 51
Telephone Number 1
Program this location to set the primary telephone number. A maximum of 24-digits can be
entered. Enter the digits consecutively and after the last digit has been entered, terminate with the [*]
key.
[INSTALLER CODE] [*] [5] [1] [*] [TELEPHONE NUMBER 1] [*]
LOCATION 52
Telephone Number 2
Program this location to set the secondary telephone number. A maximum of 24-digits can be
entered. Enter the digits consecutively and after the last digit has been entered, terminate with the [*]
key.