IDS X64

Section: 9
IDS X64 Installer Manual 700-398-02D Issued August 2010
34
LOCATION 26
Day of Week to Start Daylight Saving (default = 1)
Select the day of the week for Daylight Saving to commence, as per Table 13.
Table 13: Day of Week Data
Value
Day
1
Monday
2
Tuesday
3
Wednesday
4
Thursday
5
Friday
6
Saturday
7
Sunday
[INSTALLER CODE] [*] [2] [6] [*] [DAY] [*]
The valid data range is: 1 – 7.
LOCATION 27
Week of Month to Start Daylight Saving (default = 1)
Select the week of the month for Daylight Saving to commence as per Table 14. To set the last
week of each month, set the value to 5.
Table 14: Week of Month Data
Value
Day
1
Week One
2
Week Two
3
Week Three
4
Week Four
5
Last Week
[INSTALLER CODE] [*] [2] [7] [*] [WEEK] [*]
The valid data range is: 1 – 5.
LOCATION 28
Month to End Daylight Saving (default = 1)
Select the month as per Table 12, to disable Daylight Saving.
[INSTALLER CODE] [*] [2] [8] [*] [MONTH] [*]
The valid data range: 1 – 12, with 0 to disable.
NOTE:
If this location is disabled, then by default, locations 29 and 30 will also be disabled. This means that
even if you put values into locations 29 and 30, daylight savings will not start.
LOCATION 29
Day of Week to End Daylight Saving (default = 1)
Select the day of the week as per Table 13, to disable Daylight Saving.
[INSTALLER CODE] [*] [2] [9] [*] [DAY] [*]