EasyManua.ls Logo

IDS X64

IDS X64
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section: 9
IDS X64 Installer Manual 700-398-02D Issued August 2010
42
[INSTALLER CODE] [*] [5] [2] [*] [TELEPHONE NUMBER 2] [*]
LOCATION 53
Telephone Number 3
Program this location to set the third telephone number. A maximum of 24-digits can be
entered. Enter the digits consecutively and after the last digit has been entered, terminate with the [*]
key.
[INSTALLER CODE] [*] [5] [3] [*] [TELEPHONE NUMBER 3] [*]
LOCATION 54
Telephone Number 4
Program this location to set the fourth telephone number. A maximum of 24-digits can be
entered. Enter the digits consecutively and after the last digit has been entered, terminate with the [*]
key.
[INSTALLER CODE] [*] [5] [4] [*] [TELEPHONE NUMBER 4] [*]
LOCATIONS 61-68
Primary Account Codes (Partitions 1- 8)
The primary account code is always used for reporting, regardless of whether single or dual
reporting is used. This account code is reported to the first telephone number in the telephone module.
Each location represents a partition:
Location 61 is partition 1
Location 62 is partition 2
Location 63 is partition 3
Location 64 is partition 4
Location 65 is partition 5
Location 66 is partition 6
Location 67 is partition 7
Location 68 is partition 8
[INSTALLER CODE] [*] [LOCATION] [*] [PRIMARY ACCOUNT CODE] [*]
Refer to section 8.2 Programming Standard Locations to see how to scroll through data in a location
using the [*] key.
NOTE:
The length of the account code, either 4 or 6 digits, is set in location 24. If the length of the account code
is changed from 4 to 6 digits, then the account codes will automatically have 00 at the end of them to
make them 6 digits in length.
LOCATIONS 71-78
Secondary Account Code (Partitions 1-8)
The secondary account code is only used when dual reporting is enabled. This account code
is reported to the second telephone number in the telephone module.
Each location represents a partition:
Location 71 is partition 1
Location 72 is partition 2
Location 73 is partition 3
Location 74 is partition 4
Location 75 is partition 5
Location 76 is partition 6
Location 77 is partition 7

Table of Contents

Other manuals for IDS X64

Related product manuals