IMO HD2-3.7A-43 - 4.2.2 Installation direction

HD2 Series Inverter Quick Startup
-7-
4. Perform device commissioning by means of jogging. Check whether the motor runs in the
direction required. If no, it is recommended to change the motor running direction by
exchanging the motor wiring of any two phases.
5. Set all the control parameters and carry out actual operation.
2.7 Safety standard related data
IEC/EN 61508 (Class A system)
ISO 13849**
SIL
PFH
HFT
SFF
λdu
λdd
PTI*
PL
CCF
MTTFd
DC
Category
2
8.73x10
-10
1
71.23%
1.79x10
-9
0
1 year
d
57
343.76
years
60%
3
* PTI: Proof test interval
** Depends on the the classification defined on the EN ISO 13849-1.