IMO HD2-3.7A-43 - Torque Control

HD2 Series Inverter Basic Operation Guidelines
-66-
Function
code
Name
Description
Default
value
P04.49
Starting frequency
point for switching off
IF mode for
asynchronous motor 2
0.00–P04.51
10.00Hz
P04.50
End frequency point
for switching off IF
mode for
asynchronous motor 1
P04.44–P00.03
25.00Hz
P04.51
End frequency point
for switching off IF
mode for
asynchronous motor 2
P04.49–P00.03
25.00Hz
5.5.5 Torque control
The inverter supports torque control and speed control. Speed control mode aims to stabilize the
speed to keep the set speed consistent with the actual running speed, meanwhile, the max.
load-carrying capacity is restricted by torque limit. Torque control mode aims to stabilize the torque to
keep the set torque consistent with the actual output torque, meanwhile, the output frequency is
restricted by upper/lower limit.