IMO HD2-3.7A-43 - Page 244

HD2 Series Inverter Function Parameter List
-235-
Function
code
Name
Description
Default
value
Modify
P19.01
Type of card at
slot 2
1: Programmable card
2: I/O card
3: Incremental PG card
4: Incremental PG card with UVW
5: Ethernet communication card
6: DP communication card
7: Bluetooth card
8: Resolver PG card
9: CANopen communication card
10: WIFI card
11: PROFINET communication card
12: Sine/Cosine PG card without CD signal
13: Sine/Cosine PG card with CD signal
14: Absolute encoder PG card
15: CAN master/slave communication card
16: Modbus/Modbus TCP communication card
17: EtherCAT communication card
18: BacNet communication card
19: DeviceNet communication card
20: PT100/PT1000 temperature detection card
21: EtherNet IP communication card
22: MECHATROLINK communication card
23–65535: Reserved
0
●
P19.02
Type of card at
slot 3
0
●
P19.03
Software version
of expansion card
at slot 1
0.00–655.35
0.00
●
P19.04
Software version
of expansion card
at slot 2
0.00–655.35
0.00
●
P19.05
Software version
of expansion card
at slot 3
0.00–655.35
0.00
●
P19.06
Input state of
expansion I/O
card terminals
0–0xFFFF
0
●
P19.07
Output state of
expansion I/O
card terminals
0–0xFFFF
0
●