IMO HD2-3.7A-43 - Page 84

HD2 Series Inverter Basic Operation Guidelines
-75-
Function
code
Name
Description
Default
value
terminal
1: Switch over by Modbus/Modbus TCP
communication
2: Switch over by PROFIBUS / CANopen
/DeviceNet
3: Switch over by Ethernet
communication
4: Switch over by
EtherCAT/PROFINET/EtherNet IP
communication
Tens: Motor switchover during running
0: Disable switchover during running
1: Enable switchover during running
P12.00
Type of motor 2
0: Asynchronous motor
1: Synchronous motor
0
P12.01
Rated power of
asynchronous motor 2
0.1–3000.0kW
Depends
on model
P12.02
Rated frequency of
asynchronous motor 2
0.01Hz–P00.03 (Max. output frequency)
50.00Hz
P12.03
Rated speed of
asynchronous motor 2
1–60000rpm
Depends
on model
P12.04
Rated voltage of
asynchronous motor 2
0–1200V
P12.05
Rated current of
asynchronous motor 2
0.8–6000.0A
P12.06
Stator resistance of
asynchronous motor 2
0.001–65.535Ω
P12.07
Rotor resistance of
asynchronous motor 2
0.001–65.535Ω
P12.08
Leakage inductance of
asynchronous motor 2
0.1–6553.5mH
P12.09
Mutual inductance of
asynchronous motor 2
0.1–6553.5mH
P12.10
No-load current of
asynchronous motor 2
0.1–6553.5A
P12.15
Rated power of synchronous
motor 2
0.1–3000.0kW
P12.16
Rated frequency of
0.01Hz–P00.03 (Max. output frequency)
50.00Hz