Chapter 1: Getting Started 6
Quick Start Setup
This section is a simple guide for connecting, programming and operating your new iSmart relay. This is not
intended to be the complete instructions for programming and installation of your system. Refer to other sections in
the manual for more detailed information.
Ins
tall ISMART Client Software
Install the ISMART Client Software from CD or from the free internet download at www.imopc.com
Co
nnect Power to
iSmart relay
Connect power to the Smart Relay using the below wiring diagrams for AC or DC supply for the applicable
modules. See āChapter 2: Installationā for complete wiring and installation instructions.
To Next Page
Loading...