IMO iSmart V4 - Ethernet setup

Chapter 11: Ethernet function Instruction 3
Ethernet setup
iSmart can display local IP address, subnet mask, gateway address, master / slave mode and remote master IP
address in slave mode on LCD interface. And can be modified with keypad. If the network information is modified,
press OK to confirm, the device will restart automatically, enable the modified information to reestablish the network
connection.
-> IP ADDRESS->
IP ADDRESS
192.168.000.003
-> SUBNET MASK->
SUBNET MASK
255.255.255.000
-> GATE WAY->
GAT EWAY
192.168.000.001
-> MASTER IP ->
MASTER IP
192.169.000.005
-> SET->M/S SET
（MASTER）
RS485 SET 03
DR SET S
COIL REC /
M/S SET M
（SL AV E ）
RS485 SET 03
DR SET S
COIL REC /
M/S SET S