IMO iSmart V4 - Coil Block Instruction

Chapter 6 FBD Block Diagram Programming 139
Coil Block Instruction
Output coils including Q, Y, M, N, H, L, P, S.
FBD menu display:
H, L, P, S is special function coil, and press “OK” button into function display.
Press the button:
OK
Into function display when cursor address is output coil and coil type is H, L, P, S.
→
Move cursor: input terminal → output coil type → output coil number
←
Move cursor: output coil number → output coil → input terminal →
Logic/Function display (input terminal is block)
↑ ↓
Change output coil type when cursor address is output coil:
Q ⇔ Y ⇔ M ⇔ N ⇔ H ⇔ L ⇔ P ⇔ S ⇔ Q…;
Change output coil number when cursor address is output coil number;