4
1.2.4 Environmental requirements
The printer is for indoor use only.
Air quality conditions (conductive or non-conductive) with excessive solid particles
might cause damage to the system.
The printer shall operate between 15°C and 30°C (59°F to 86°F) with a relative humidity
range of 30% to 70% (non-condensing).
The printer storage temperature shall be between 0°C and 35°C (32°F to 95°F) with a
relative humidity range of 20% to 90% (non-condensing).
1.2.5 Statement
ce matériel est conforme aux limites de dose d'exposition aux rayonnements, FCC / CNR-102
énoncée dans un autre environnement.cette eqipment devrait être installé et exploité avec distance
minimale de 20 entre le radiateur et votre corps.
To Next Page
Loading...
