Battery Commands
Copyright © Itech Electronic Co., Ltd. 78
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
BATT:DISC:CURR 3.0
Query syntax
BATTery:DISCharge:CURRent? [MINimum|MAXimum]
Returns
NR3
BATTery:STOP:VOLTage <NRf+>
This command is used to set the voltage value for the battery test cutoff.
Syntax
BATTery:STOP:VOLTage <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
BATT:SHUT:VOLT 4.0
Query syntax
BATTery:STOP:VOLTage? [MINimum|MAXimum]
Returns
NR3
BATTery:STOP:CURRent <NRf+>
This command is used to set the current value of the battery test cutoff.
Syntax
BATTery:STOP:CURRent <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
BATT:SHUT:CURR 3.0
To Next Page
Loading...
