System Commands
Copyright © Itech Electronic Co., Ltd. 17
SYSTem:COMMunicate:SERial:BAUDrate
This command sets the baud rate of the serial port.
Syntax
SYSTem:COMMunicate:SERial:BAUDrate
Arguments
<4800|9600|19200|38400|57600|115200>
Example
SYST:COMM:SER:BAUD 9600
Query syntax
SYSTem:COMMunicate:SERial:BAUDrate?
Returns
4800|9600|19200|38400|57600|115200
SYSTem:VERSion?
This command queries the SCPI version of the instrument.
Syntax
SYSTem:VERSion?
Arguments
None
Example
- > SYST:VERS?
< - "1993.1"
Returns
AARD
SYSTem:COMMunicate:LAN:DNS1 <dns>
This command sets DNS primary address for LAN.
Syntax
SYSTem:COMMunicate:LAN:DNS1 <dns>
Arguments
SPD
To Next Page
Loading...
