ITech IT-M3400 Series

System Commands
Copyright © Itech Electronic Co., Ltd. 19
Returns
NR1
SYSTem:COMMunicate:LAN:MDNS <onoff>
This command is used to set the status of MDNS function.
Syntax
SYSTem:COMMunicate:LAN:MDNS <onoff>
Arguments
0|OFF|1|ON
Example
SYST:COMM:LAN:MDNS 1
Query syntax
SYSTem:COMMunicate:LAN:MDNS?
Returns
0|1
SYSTem:COMMunicate:LAN:PING <onoff>
This command is used to set the status of MDNS function.
Syntax
SYSTem:COMMunicate:LAN:PING <onoff>
Arguments
0|OFF|1|ON
Example
SYST:COMM:LAN:PING 1
Query syntax
SYSTem:COMMunicate:LAN:PING?
Returns
0|1
SYSTem:COMMunicate:LAN:TELNet <onoff>
This command is used to set the status of telnet function.