Battery Commands
Copyright © Itech Electronic Co., Ltd. 79
Query syntax
BATTery:STOP:CURRent? [MINimum|MAXimum]
Returns
NR3
BATTery:STOP:CAPacity <NRf+>
This command is used to set the capacitance value of the battery test cutoff.
Syntax
BATTery:STOP:CAPacity <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
BATT:SHUT:CAP 3.0
Query syntax
BATTery:STOP:CAPacity? [MINimum|MAXimum]
Returns
NR3
BATTery:STOP:TIME <NRf+>
This command is used to set the battery test cutoff time.
Syntax
BATTery:STOP:TIME <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
BATT:SHUT:TIME 3.0
Query syntax
BATTery:STOP:TIME? [MINimum|MAXimum]
Returns
NR3
To Next Page
Loading...
