Source Commands
Copyright © Itech Electronic Co., Ltd. 58
Syntax
[SOURce:]POWer:PROTection[:LEVel] <NRf+>
Arguments
<NRf+> MIN TO MAX
Default value
MAX
Example
POW:PROT 900.0
Query syntax
[SOURce:]POWer:PROTection[:LEVel]? [MINimum|MAXimum]
Returns
NRf+
[SOURce:]POWer:PROTection:DELay <NRf+>
This command sets the over-power delay time of the power supply.
Syntax
[SOURce:]POWer:PROTection:DELay <NRf+>
Arguments
<NRf+>
Default value
10.00S
Example
POW:PROT:DEL 10.00
Query syntax
[SOURce:]POWer:PROTection:DELay? [MINimum|MAXimum]
Returns
NRf+
[SOURce:]POWer:PROTection:STATe <Bool>
This command enables or disables the over-power function.
To Next Page
Loading...
