ITech IT-M3400 Series Programming Guide

Source Commands
Copyright © Itech Electronic Co., Ltd. 53
Default value
0.01S
Example
VOLT:SLEW:NEG 0.03
Query syntax
[SOURce:]VOLTage:SLEW:NEGative? [MINimum|MAXimum]
Returns
NRf+
[SOURce:]VOLTage:SLEW:POSitive <NRf+>
This command sets the voltage rising slew rate of the power supply.
Syntax
[SOURce:]VOLTage:SLEW:POSitive <NRf+>
Arguments
<NRf+>
Default value
0.01S
Example
VOLT:SLEW:POS 0.03
Query syntax
[SOURce:]VOLTage:SLEW:POSitive? [MINimum|MAXimum]
Returns
NRf+
[SOURce:]VOLTage[:OVER]:PROTection[:LEVel]
<NRf+>
This command sets the over-voltage limit of the power supply.
Syntax
[SOURce:]VOLTage[:OVER]:PROTection[:LEVel] <NRf+>
Arguments
<NRf+> MIN TO MAX

ITech IT-M3400 Series Specifications

General

Brand	ITech
Model	IT-M3400 Series
Category	Power Supply
Language	English