List Commands
Copyright © Itech Electronic Co., Ltd. 67
Chapter12 List Commands
LIST:STEP:COUNt <NR1>
This command sets the total steps of the list program.
Syntax
LIST:STEP:COUNt <NR1>
Arguments
<1-100>
Example
LIST:STEP COUN 1
Query syntax
LIST:STEP:COUNt?
Returns
NR1
LIST[:STEP]:VOLTage <NR1>,<NRf+>
This command sets the voltage value of the nth step in the list program.
Syntax
LIST[:STEP]:VOLTage <NR1>,<NRf+>
Arguments
<1-100>,<MINimum-MAXimum|MINimum|MAXimum>
Example
LIST:VOLT 1,100.00
Query syntax
LIST:VOLTage?
Returns
NR3
To Next Page
Loading...
