ITech IT-M3400 Series Programming Guide

System Commands
Copyright © Itech Electronic Co., Ltd. 11
SYSTem:ERRor?
This command reads the error code and error information.
Syntax
SYSTem:ERRor?
Arguments
None
Example
- > SYST:ERR?
< - 0,"NO_ERR"
Note
⚫ “ - >” indicates the commands that you send to instrument.
⚫ “< -” indicates the response from instrument.
Returns
AARD
SYSTem:CLEar
This command clears the system status register.
Syntax
SYSTem:CLEar
Arguments
None
Example
SYST:CLE
Query syntax
None
Returns
None
SYSTem:REMote
This command takes the instrument out of front-panel control mode and
switches it to remote control mode.

ITech IT-M3400 Series Specifications

General

Brand	ITech
Model	IT-M3400 Series
Category	Power Supply
Language	English