ITech IT-M3400 Series

Trace Commands
Copyright © Itech Electronic Co., Ltd. 62
Chapter11 Trace Commands
TRACe:CLEar
This command is used to clear reading cache. If cache is not cleared,
subsequent saving will overwrite the previous data.
Syntax
TRACe:CLEar
Arguments
None
Example
TRAC:CLE
Query syntax
None
Returns
None
TRACe:POINts <NRf+>
This command is used to specify cache size.
Syntax
TRACe:POINts <NRf+>
Arguments
<2-2500>|MINimum|MAXimum
Default value
1000
Example
TRAC:POINt MAX
Query syntax
TRACe:POINts?