Status Commands
Copyright © Itech Electronic Co., Ltd. 4
Syntax
STATus:OPERation:ENABle <n>
Arguments
<0-65535>
Example
STAT:OPER:ENAB 16
Query syntax
STATus:OPERation:ENABle?
Returns
NR1
STATus:OPERation:NTRansition <n>
This command is used to edit the negative transition trigger register of
operation event.
Syntax
STATus:OPERation:NTRansition <n>
Arguments
<0-65535>
Example
STAT:OPER:NTR 16
Query syntax
STATus:OPERation:NTRansition?
Returns
NR1
STATus:OPERation:PTRansition <n>
This command is used to edit the positive transition trigger register of
operation event.
Syntax
STATus:OPERation:PTRansition <n>
To Next Page
Loading...
