ITech IT-M3400 Series

Measure & Fetch Commands
Copyright © Itech Electronic Co., Ltd. 27
MEASure[:SCALar]:UUT:TEMPerature?
FETCh[:SCALar]:UUT:TEMPerature?
This command queries the measured UUT temperature.
Syntax
MEASure[:SCALar]:UUT:TEMPerature?
FETCh[:SCALar]:UUT:TEMPerature?
Arguments
None
Example
MEAS:UUT:TEMP?
FETC:UUT:TEMP?
Returns
NRf
MEASure[:SCALar]:RECover:ENERgy?
FETCh[:SCALar]:RECover:ENERgy?
This command queries the total energy which return to grid.
Syntax
MEASure[:SCALar]:RECover:ENERgy?
FETCh[:SCALar]:RECover:ENERgy?
Arguments
None
Example
MEAS:REC:ENERgy?
FETCh:REC:ENERgy?
Returns
NRf