Common Commands
Copyright © Itech Electronic Co., Ltd. 87
Syntax
*IDN?
Arguments
None
Default value
Not applicable
Example
- > *IDN?
< - ITECH Ltd.,IT3400,60234567890123456,1.01-1.02-1.03
Note
⚫
“ - >” indicates the commands that you send to instrument.
⚫
“< -” indicates the response from instrument.
Returns
AARD
*OPC
This command sets the Operation Complete (OPC) bit in the Standard Event
Status Register to 1 when all other commands are complete.
Syntax
*OPC
Arguments
None
Default value
Not applicable
Example
*OPC
Query command
*OPC?
Returns
NR1
To Next Page
Loading...
