ITech IT-M3400 Series Programming Guide

Common Commands
Copyright © Itech Electronic Co., Ltd. 92
*WAI
Pauses additional command processing until all pending operations are
complete.
Query command
*WAI
Arguments
None
Default value
Not applicable
Example
*WAI
Returns
None
*PSC <Bool>
This instruction is used to control whether the status register is cleared when
the instrument is powered-on. This instruction affects the value of the status
register at the next powered-on.
Syntax
*PSC <Bool>
Arguments
0|OFF|1|ON
Default value
OFF
Example
*PSC 0
Query syntax
*PSC?
Returns
0|1

ITech IT-M3400 Series Specifications

General

Brand	ITech
Model	IT-M3400 Series
Category	Power Supply
Language	English