ITech IT-M3400 Series

Measure & Fetch Commands
Copyright © Itech Electronic Co., Ltd. 26
MEASure[:SCALar]:VOLTage[:DC]?
FETCh[:SCALar]:VOLTage[:DC]?
This command queries the present measured voltage.
Syntax
MEASure[:SCALar]:VOLTage[:DC]?
FETCh[:SCALar]:VOLTage[:DC]?
Arguments
None
Example
MEAS:VOLT?
FETC:VOLT?
Returns
NRf
MEASure[:SCALar]:CAPacity?
FETCh[:SCALar]:CAPacity?
This command queries the charging capacity of the battery.
Syntax
MEASure[:SCALar]:CAPacity?
FETCh[:SCALar]:CAPacity?
Arguments
None
Example
MEAS:CAP?
FETC:CAP?
Returns
NRf